BoatSafe 250w Engine Compartment Heater

BoatSafe 250w Engine Compartment Heater


BoatSafe 250w Engine Compartment Heater

Price Match Guarantee
Price: $269.49 
Retail Price: $399.00
You Save 32%
Availability: In Stock

Quantity:   

  • Description

  • Shipping

  • Reviews

SPECIFICATIONS - MODEL JR - 250W

(For Engine Compartments of 150 cu. ft. or less) (Boats with single engine, up to 24', or most sailboats)


NOTE: This heater WILL NOT provide adequate

protection for a boat that is stored out of the water on a lift, or on a trailer.


UNIT DIMENSIONS:

  • 51/2"H x 41/2"W x 141/2" L - 1" Mounting Bracket at each end of unit. Weight - Approximately 4 lbs.

UNIT ENCLOSURE:

  • 16 Ga. aluminum. Designed for exceptional strength and long life. CAD Vents for proper air flow and maximum heat distribution. Fully Powder Coated for scratch and corrosion resistance.

HEATING ELEMENT:
  • 250W, Cast Alloy, completely sealed, specially designed and engineered for this application. Cast Alloy provides excellent corrosion resistance. Vibration resistant. Will not spark. UL recognized.


THERMOSTAT CONTROL:
  • Hermetically sealed. Factory calibrated and pre-set to activate heater unit when ambient air temperature falls below 45 F (approximately), and continue operation until ambient reaches 55 F (approximately). FM approved.

FAN:
  • Heavy Duty, computer style induction fan. Rated at 21 CFM. UL recognized. CSA certified.

POWER CORD:
  • 15' - Rated 13A, heavy duty service. Includes a molded 3 prong plug. UL and CSA recognized.

UNIT DRAW:
  • Approximately 2.2A at 120V.

BTU OUTPUT:
  • 860 BTU

COST TO OPERATE:
  • 2/Hr. (Based on Average Electricity Cost of 8/KWH)

TEST OPERATION OF UNIT:


To "test" the unit when ambient air temperature is above 45oF you must simulate an ambient below 45F. To create the simulation: With the heater unit plugged into a 120V power source, locate the 1/2" dia. hole marked "Test" on the end cover of the unit. Using the 6 oz. can of Freeze Mist spray supplied with your heater, insert the "straw" into the nozzle and spray a 2-3 second burst of mist into the "Test" hole. This will "trick" the thermostat into turning the heater "ON". After a period of time (30 sec. - 3 min.), the ambient temperature of your test environment will resume control of the thermostat and turn your heater "OFF".

JR-250W




Sign up for our free email newsletter and receive coupons, exclusive deals and product news.

Categories